Place four speed nuts M5 (4) on the front audio
module holder (30) and the rear audio module
holder (31) in the boot.
7.
To prepare the installation sites and parts
Retrofit/Installation kit No. 65 90 0 151 635 (others see cover sheet)
Issue date: 06.2002
Installation instructions No. 01 29 0 028 872
EN/9
Carefully cut out the areas marked grey (30) in
the centre console using an oscillating saw.
As you cut out the areas make sure that you
do not damage any cables or visible surfaces in
the centre console.
30
30
R135
24
F 46 1097 B
31
4
30
F 46 1098 B
Slide the navigation computer holder (9) into the
audio module holder and secure it with four
hexagonal screws M5x14 (5).
9
5
F 46 1171 B
Only required for cars with four-wheel drive
Cut out the monitor console (1) in the area
marked grey (30) (otherwise it will collide with the
gearshift console when it has been installed).
As you cut out the area make sure that you
do not damage any visible surfaces.
1
30
F 46 1099 B
