BMPRO JControl, Руководство пользователя

Страница: 9 / 20

9
USING YOUR JCONTROL
JControl does not have an ON/OFF button. The JControl receives power directly from
the J35 through the connected data cable. The JControl will automatically turn off if it is
not receiving power from the J35.
Upon start-up, the JControl will display
l0A dng
on its Home screen, until
communication between the JControl and J35 is established.
Once communication is established, the JControl will display the relevant battery and
system information on its screen. If the JControl cannot establish communication to the
J35, the JControl will display
Err to
. Please check the data cable between the JControl
and J35.
JCONTROL SET-UP MODE
ENTERING SET-UP MODE
The JControl Set-Up mode allows you to access the functions to configure the JControl
display, enter important battery information, set alarms and configure tanks.
To enter Set-Up mode, hold the SETTINGS button down until
SET UP
is seen in the
AMPS and VOLTS display.
The Set-Up screen also includes:
Menu Function Display
Displays the various Set-Up menu functions that can be accessed in Set-Up mode
and any associated information . If the function can be edited, the menu function
will flash on screen.
Edit
Use the Battery button on the JControl to select a menu function
or sub-function to edit.
Figure 2: The JControl start-up screen
1 2