17
SERVICING
Do not attempt to service the JControl yourself, OR dismantle, modify or repair the
JControl yourself; this will void your warranty. If your JControl requires servicing,
please consult your BMPRO dealer or visit
teambmpro.com
for assistance.
FAQS AND TROUBLESHOOTING
Need more help troubleshooting your JControl?
Contact our customer service team online at
teambmpro.com/technical-support/
or give us a call on (03) 9763 0962.
Why has the JControl screen turned off?
The JControl receives power to run the monitor from the J35. If the J35 shuts power to
the monitor, the JControl screen will turn off. The J35 will shut power to the JControl if:
1.
The user activated the load isolation switch connected to the J35. This turns off
power to the data cable connecting the JControl and J35.
Check that the switch has not been activated.
2.
The J35 has entered Storage Mode and to conserve remaining battery voltage will
disable power to the JControl.
To repower the JControl, plug the J35 to a power source and begin battery charging.
When the battery is sufficiently charged, the J35 will enable power to the JControl.
Why are the battery volts and amp flashing on the JControl?
Battery volts and amps will flash on the JControl if a BC300 + CommLink external shunt
has been installed and communication with the shunt has been lost.
Use the advanced menu function
EShunt
to clear the external shunt from memory and
re-establish communication with the BC300 + CommLink. See the Appendices for more
details.
Содержание JControl
Страница 1: ...TEAMBMPRO COM OWNER S MANUAL JControl ...
