background image

Designed by BMPRO, one of Australia’s leading power solution experts, the 

BMPRO product range is proudly designed and manufactured in Melbourne, 

Australia, and represent a high-quality product that will provide years of 

service.

DISCLAIMER

 BMPRO accepts no liability for any loss or damage which may 

occur from the improper or unsafe use of its products. Warranty is only valid 

if the unit has not been modified or misused by the customer.

Copyright © 2019

MANUAL PART 032771 

REV 3.0

Correct installation is the most critical factor in ensuring the safe use of the JControl. If 

every consideration of these instructions has been satisfied, the JControl will be safe to 

operate. 

Keep the JControl away from water or other liquids.

Clean the housing of this product lightly with a dry or moist cotton cloth. Do not use 

alcohol, thinners, benzene or any other chemical cleaner. Do not allow any liquids to 

enter the housing.

The JControl is a high precision electronic product. It contains no user-serviceable parts 

inside. Do not try to dismantle, modify or repair it yourself. Disassembly, service or repair 

by an unauthorised person will void the warranty.

SAFETY PRECAUTIONS

Please read the Safety Precautions before installing or using the JControl.  
Be sure to observe all precautions without fail. Failure to observe these instructions 
properly may result in personal damage, or personal injury which depending on the 
circumstances may be serious and cause loss of life.

Содержание JControl





















Отзывы: