BMGi EGA-04 Скачать руководство пользователя страница 6

Remotes

Erasing Remotes

Press and hold the Learn button for 8 seconds, the buzzer will beep and the 

digital display will read 00. At this time, all the information stored in the on 

board receiver has been deleted, release the Learn button.

Remote distance – up to 30 metres.  This distance will vary greatly due to site 

interference that may not be visible to the eye.  Some sites will allow for 

greater range than 30 metres, some sites might only achieve 5 metres. 

Remote frequency – Rolling code 433mhz 

*Only genuine remotes will operate with the on board receiver.  To ensure your 

remote is a genuine remote, you will notice the small LED light will flicker an 

ORANGE colour when you press one of the 4 buttons on your remote for 2 

seconds or until the light starts to flicker.  

Remote Storage – The on board receiver can store up to 120 remotes.

Empty

Empty

Full open and close for 

dual swing or single swing 

gates

Party Mode

Overrides auto close 

if set

Compatible Remote

Empty buttons can be used 

if you have a second gate on 

your property or if you add a 

long range receiver to the kit

Содержание EGA-04













Отзывы: