BMGi EGA-04, Инструкция по установке и эксплуатации

Страница: 5 / 12

Remote Learning - compatible remotes with A, B, C, D buttons (orange
LED light)
To learn new remotes to your control board.
Press the Learn button for 1 seconds and then release. The STATE red LED
light will go out. Now press button A on your remote once for 2 seconds or
until LED light begins to flash, the control board will “BEEP” once and display
the remote number you just learnt.
Remote 1 will show 01, remote 5 will show 05 etc.
The STATE red LED light will come back on solid.
Your remote is now tuned in.
Button A and C will automatically be assigned functions.
These functions cannot be altered or removed.
Button A Full open / close for Dual swing gates and Single swing gates
Button B Empty
Button C Party mode function. Party mode is used to override auto
close. It will override P9 auto close functions. You
must be within 1 metre of the gate to ensure you are within
working range for the remote.
Button D Empty
Button C Party mode, this feature overrides auto close.
Auto close is turned off when you receive the kit, you will need to turn this on
yourself if you would like this feature. Refer to Menu settings to set this up.
To disable auto close, press button A on your remote to open your gate, once
the gate has reached the full open position, wait 2 seconds, now press button
C on your remote for 2 seconds or until the orange LED light comes on for
your remote.
You should be within 1 metre of the control box when activating this function to
ensure the signal has been picked up by the control board.
Now wait for the auto close time to pass to ensure you have successfully
bypassed the auto close function.
When you are ready to close the gate, press Button A on you remote or any
triggering devices you might have e.g. push button or keypad. Your auto close
function will be reactivated for the next time the gate is opened.
Remotes