28-6-2011 35 033000=13069F
Make sure the House Code on the console is set to A and the Unit Code to 1 (see 10.6). Set the
dials on your lamp/dimmer module to House Code A and Unit Code 1.
Make sure the lamp connected to the lamp/dimmer module is on and the lamp is working.
Use a different wall socket. Check whether the indicator of the remote control flashes when
you press the button. If necessary replace the battery/ies.
When using multiple phases in your house, you may need to couple these phases for X10
signals. See
www.bmbelectronics.eu
for more information.
What if you cannot register the SH600 Comfort Remote Control with the console?
Remove the batteries from the remote control. Keep one of the buttons pressed for a few
seconds. Set the switch to SEC. Replace the batteries. Press the PANIC button until the
indicator starts flashing. Reregister the remote control with the console.
What to do in case of a false alarm?
Do not mount motion detectors in direct sunlight. Mount motion detectors in such a way they
are not aimed at a heater or other heat source.
Is the MS18 pet-friendly?
No. The MS18 is not specifically pet-friendly. These motion detectors do exist (not wireless). Your
security system has an extra input for wired sensors (see 9.3). You can also connect the sensor
to the external contact of the DS18 sensor (9.4).
