BlueLine VORTEX 8000Q Скачать руководство пользователя страница 3

Страница: 3 / 100

BLUE

LINE VORTEX 8000Q

LIMITED WARRANTY

BLUE

LINE warrants your machine to be free of defects in material and workmanship. This

warranty shall extend to the designated parts for the specific period of time listed from the date

of delivery to the user. If

BLUE

LINE receives notice of any defects during the warranty period,

BLUE

LINE will either, at its option, repair or replace products that prove to be defective. Any

transportation, related service labor, normal maintenance and diagnostic calls are not included.

Vacuum Pump (Through manufacturer or local dealer)_______ 18 months

Water Pump_________________________________________ 1 year

Oil Pump___________________________________________ 1 year

Waste Pump_________________________________________ 1 year

Engine Heat Exchanger________________________________ 1 year

Wands (Excluding shut off valve and orifices)______________ 1 year

Waste and Water Tanks________________________________ 1 year

Pressure Regulator____________________________________ 1 year

All Other Components_________________________________ 1 year

This warranty shall not apply to defects caused by improper operation, inadequate maintenance

by the customer, unauthorized modification or misuse, improper repair, freezing or damage due

to hard water scaling.

Electrical components, disposable filters, belts, hoses, fittings, o-rings and other service

maintenance items are not under warranty. Components supplied by

BLUE

LINE, but provided

by other manufacturers, will only be warranted to the extent that they are warranted to

BLUE

LINE.

To receive warranty service, products must be returned to a

BLUE

LINE designated service

facility. The customer shall prepay shipping charges for products returned to

BLUE

LINE for

warranty evaluation and

BLUE

LINE shall pay for the return of products to the customer.

BLUE

LINE makes no other warranty, expressed or implied, with respect to this product.

BLUE

LINE disclaims the implied warranties of merchantability and fitness for a particular

purpose. Any implied warranty of merchantability or fitness is limited to the specific duration of

this limited warranty.

This warranty gives the customer specific legal rights, and you may also have other rights that

may vary from state to state, or province to province.

The remedies provided herein are the customer’s sole and exclusive remedies. In no event shall

BLUE

LINE be liable for any direct, indirect, special, incidental, or consequential damages,

whether based on contract, tort, or any other legal theory.

Содержание VORTEX 8000Q





































































































Результаты поиска

Содержание VORTEX 8000Q

Отзывы:

Похожие инструкции для VORTEX 8000Q

Бренды по названию

Популярные бренды

BlueLine VORTEX 8000Q, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание VORTEX 8000Q

Отзывы:

Похожие инструкции для VORTEX 8000Q

Бренды по названию

Популярные бренды