U
SER
M
ANUAL
WRAP
P
RODUCT
S
ERIES
Note:
Instead of typing the contents of the file, you can of course also copy-and-paste it from your favourite
text editor.
You can also create and edit the file using the "vi" editor at WRAP telnet prompt.
Note:
Currently it is not
possible to use "vi" at management console due some WRAP operating system problems. However, it is also
possible to use your own text editor. Just download the file, edit it locally in your computer and upload the
file back again. Downloading and uploading files is described in section 4.4.
3.9 R
ESETTING
C
ONFIGURATION
You can restore the default configuration by deleting the main configuration file and rebooting the board.
When the system starts up, the default configuration settings are restored. If you have changed the
configuration only by using the "setup" application, the following commands at WRAP command prompt are
enough:
/>
rm /etc/sysconfig
/>
reboot
If you have made changes to other configuration files by editing them manually and want to restore the
original file(s), just delete the file(s) in question and reboot the board.
3.10 A
DVANCED
C
ONFIGURATION
More advanced configuration can be done by editing the appropriate files in /etc directory. Do not change
these files unless you are an expert user. The most "safe" files and their purposes are listed in Table 2.
File
Purpose
/etc/bluetooth.conf WRAP
Bluetooth
Server Socket Interface commands
that are run every time the Bluetooth Server starts.
See the WRAP SDK manual for details.
/etc/crontab
Cron daemon settings. Standard crontab format.
/etc/ftpd.conf
FTP daemon configuration file. Self documented.
/etc/profile
Basic user profile.
Table 2. The Supported Advanced Configuration Files.
14 (26)
