Blue-White FLEX-PRO PROSERIES-M Flex-A-Chem M-3, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 40

Page 12
3.2 Configuration Menu
Below is the menu structure for the Configuration screens.
- Set Password
Setting your password to:
Are you sure?
1234
Yes
No
- Menu
+ Configuration
+ Input Setup
+ Pump Output
<- Esc
- Configuration
+ Display Language
+ Set Password
+ Display Rate
<- Esc
+ Reset to Factory Defaults
- Display Language
English
Spanish
German
French
Done
3.2.1 Language Selection
Press MENU button to enter the menu structure.
Select Configuration and Press ENTER button.
Select Display Language and Press ENTER button.
Select your desired language, then Press ENTER.
Note: English is the default language.
Select Done at bottom of list to confirm your selection. Press ENTER button.
Select <-Esc on the main menu screen to exit the menu structure and enter the
run mode.
Flex-Pro
- Configuration
+ Display Language
+ Set Password
+ Display Rate
<- Esc
+ Reset to Default
- Display Language
English
Spanish
German
Done
French
- Display Language
- Configuration
+ Display Language
+ Display Rate
<- Esc
+ Reset to Default
- Set Password
Enter Password:
OFF = 0000
+ Set Password
English
Spanish
German
French
Done
000 0
Press ENTER to set..
- Menu
+ Configuration
+ Input Setup
+ Output Setup
<- Esc
- Configuration
+ Display Language
<- Esc
+ Reset to Default
+ Set Password
+ Display Rate
- Display Rate
%Speed
RPM
ML/min
Oz/min
- Configuration
+ Display Language
<- Esc
+ Set Password
+ Display Rate
- Defaults
+ Reset to Default
Reset to Default?
Are you sure?
Yes
No
Liter/Hr
Gal/Hr (US)
Gal/day (US)
Done
- Display Rate
Oz/min
Liter/Hr
Gal/Hr (US)
Gal/day (US)
Done
Hidden
(select one) (select one)
(select one) (select one)
Note: Scroll down using DOWN
arrow to see “Hidden” menus on
display.
+ Power Fail option
Page 13
Flex-Pro
- Configuration
+ Display Language
<- Esc
+ Set Password
+ Display Rate
+ Reset to Factory Defaults
- Reset to Factory Defaults
Reset to Factory Defaults!
Are you sure?
Yes
No
3.2.3 Reset Factory Defaults
This will reset pump to the factory defaults. This will restore the pump to the
original configuration when it left the factory.
Press MENU button to enter menu structure.
Select Configuration and Press ENTER button.
Select Reset to Factory Defaults and Press ENTER button.
Select No or Yes , then ENTER button.
Select <-Esc on the main menu screen to exit the menu structure and enter the
run mode.
3.2.2 Display Rate (Units of Measure)
By default, the pump will display %Speed (motor speed) and RPM. It is
recommended you select an additional
Display Rate . After selecting another
Display Rate (such as ML/Min), the pump display may be toggled through
%Speed, RPM and your selected Display Rate by pressing the right arrow
button.
Press MENU button to enter the menu structure.
Select Configuration and Press ENTER button.
Select Display Rate and Press ENTER button.
Select your desired Display Rate (unit of measure). Note: %Speed and RPM
will always be active and available to view while pump is in operation.
Select Done at the bottom of the list to confirm your selection and to return
back to the previous screen. Press ENTER button.
Select <-Esc on the main menu screen to exit the menu structure and enter the
run mode.
- Configuration
+ Display Language
<- Esc
+ Reset to Factory Defaults
+ Set Password
+ Display Rate
- Display Rate
%Speed
RPM
ML/min
Oz/min
Liter/Hr
- Display Rate
Oz/min
Liter/Hr
Gal/Hr (US)
Gal/day (US)
Done
While pump is operating in any Run
Mode, press RIGHT arrow to scroll
through multiple read-only screens
including output rate and input signal
values.
Note: This is a read-only feature, no
changes can be made while in Run
Mode.
Tip!