Blue Max 52623 Скачать руководство пользователя страница 7

Страница: 7 / 19

Starter aid button

BEFORE STARTING, MAKE SURE

YOU HAVE NOTED THE

FOLLOWING INSTRUCTIONS:

Make sure you have read and

understood the entire instruction

manual.

Working with this product is

demanding, therefore ensure you are

physically and mentally fit to

complete the job safely.

Ensure that you have all the

accessories and tools needed for

assembly and operation.

Make sure that you wear suitable

personal protective equipment.

Ensure that no unauthorized people,

especially children, and pets are

nearby or could enter the working

area.

Make sure no explosive or

flammable materials are present.

Ensure that the product is free from

damage and that it is not worn.

Ensure that the tank is filled with the

correct fuel/oil mixture.

Make sure that safety devices and

accessories are correctly fixed.

Double check that all assembly tools

have been removed from the product

before use.

Undertake periodic structural checks

of this product, do not use if you have

any doubts about its suitability for its

intended purpose.

WARNING: For your own and the

safety of other people you must

read and follow the safety

instructions in this manual.

INTENDED USE
This brush cutter/string trimmer is

designated with a maximum power

output of maximum 42.6cc.

With the cutter blade attached, this

product is intended to cut small types

of weeds, lawn grass, or similar soft

vegetation.

This product should not be used to

cut unusually thick grass or

vegetation, wet grass, or to shred

leaves, etc.

This product is intended for private

domestic use only. Not for

commercial trade or use. It must not

be used for any purposes other than

those described.

1. Unscrew and remove the fuel tank

cap (7) (Fig. 11).
2. Only use correctly mixed fuel/oil.

Do not overfill. Leave a minimum

5mm of space between the top of the

fuel and the inside edge of the tank

(6) to allow for expansion (Fig. 12).
3. Use a fuel funnel fitted with a filter

to avoid debris entering the tank.
4. Wipe up spilled fuel with a soft

cloth and refit the fuel tank cap (7).
5. Always dispose of fuel, used oil,

and soiled objects according to local

regulations.

1-800-348-5004

Starter aid button

[email protected]

OPERATING CONTROLS

Содержание 52623




















Результаты поиска

Содержание 52623

Отзывы:

Похожие инструкции для 52623

Бренды по названию

Популярные бренды

Blue Max 52623, Руководство по эксплуатации

Результаты поиска

Содержание 52623

Отзывы:

Похожие инструкции для 52623

Бренды по названию

Популярные бренды