Blue Max 52623, Руководство по эксплуатации

Страница: 9 / 19

9
CARBURETOR
If the cutting heads fail to operate at
operational speed the carburetor may
need to be adjusted. Please contact
an authorized service center or
qualified person to adjust it.
OPERATION
PREPARATION
1. Prior to use, first check the product
for damage or any signs of wear,
particularly if the product has not
been used for a long time,
2. Check the fuel level and refill with
correctly mixed fuel/oil if necessary.
3. Wear correct personal protective
equipment to protect yourself from
hidden objects that may be thrown
from the cutting heads.
4. Ensure that the area to be worked
is clear of stones, sticks, wires, or
other products that could damage the
product.
COLD START
1. Set ignition switch to “I”.
2. Press primer until fuel is visible.
3. Turn chock lever to “ START”.
4. Press throttle control and interlock.
5. Pull recoil starter until the engine started.
6. Turn chock lever to “RUN”.
7. Press throttle control to release starter
aid button.
8. Warm up the engine a few minutes
on idling speed.
9. Operate. (Fig.20)
WARM START
1. Set ignition switch to “I”.
2. Turn chock lever to “RUN”.
3. Press Primer until fuel visible.
4. Pull recoil starter until engine started.
5.Operate.(Fig.21)
WARNING: Always attach the
product to the harness. Do not
carry it only with your hands.
CUTTING
1. Use the cutter blade (33) to cut
heavier weeds, brush, and similar
vegetation with a thickness of up to
20mm.
WARNING: To avoid hazards,
never cut heavier weeds, brush,
and similar vegetation with a
thickness of over 20mm. Avoid
contact with stones, wires, glass,
etc. that may cause injury to the
user. Inspect the blade regularly
for damage, cracks, or breaks.
Always replace a damaged blade.
WARNING: When working with the
cutter blade, there is always a risk
of kickback if the cutting head
comes into contact with a hard
object. Kickback will cause the
sudden stalling of the cutting
head, which in turn results in the
cutting head being forced in the
opposite direction to the rotation
of the cutter blade. Ensure that
you retain a firm grip with both
hands at any sign of such
kickback. Pay attention and retain
a
2. Hold the product firmly so that
it sits with a gap between the
product and your right side.
firm stance to avoid injuries.
FIG. 17
FIG. 18
FIG. 20
FIG. 21
FIG. 22
1-800-348-5004
4.Empty fuel tank.
5.Maintain.
6.Store.(Fig.22)
1
1
1 2 3
6 5 4
4 5
2 3
2 3
START
RUN
RUN
4
7
8 9
6 5
customerservice@focus-ontools.com
FIG. 19
19
STOPPING
1. Release throttle control and
interlock.
2. Run idle.
3. Set ignition switch to “O”.