background image

3

[email protected]

2. Never allow children or people

unfamiliar with these instructions to

use the product. Local regulations

can restrict the age of the operator.

3. Never operate while people,

especially children, or pets are

nearby.

4. Keep in mind that the operator

or user is responsible for accidents

or hazards occurring to other

people or their property.

5.Allow the rope to return slowly

and in a controlled manner each

time it is pulled! Do not pull out

the recoil starter beyond the red

colour band at the end of the

recoil starter. Do not start the

engine while handling the

product with one hand!

6. The product must not be used

by persons under the influence of

alcohol or drugs.

7. Do not operate the product

without guards or if it is damaged.

8. Never use this product indoors.

9. This product produces toxic

exhaust fumes when the engine

is started.

10. During operation, this product

may generate dust, fumes, and

smoke containing chemicals that

affect your health.

11. Be careful when using this

product and protect yourself

properly.

12. Avoid breathing exhaust fumes

voluntarily, always hold the product

properly during operation.

13. Wear gloves and keep hands

warm.

14. Prolonged use of the product

exposes the user to vibrations that

can cause a range of conditions

collectively known as hand-arm

vibration syndrome (HAVS) e.g.

fingers going white; as well as

specific diseases such as carpal

tunnel syndrome.

15. To reduce the risk of HAVS,

always wear protective gloves and

keep your hands warm.

15. The symptoms of HAVS

include any combination of the

following:

Tingling and numbness in the 

fingers,

Not being able to feel things 

properly,

Loss of strength in the hands,
Fingers going white (blanching) 

and becoming red and painful on 

recovery (particularly in the cold 

and wet, and probably only in the 

tips at first).
Seek medical advice immediately if 

such symptoms are experienced.
PREPARATION
1. This product can cause serious

injuries. Read the instructions

carefully for proper handling,

preparation, maintenance, starting,

and stopping of the product.

Become familiar with all controls

and the proper use of the product.
2. Beware of power lines.
3. Avoid operating while people,

especially children, are nearby.
4. Dress properly. Do not wear

loose clothing or jewelry, which

can get caught in moving parts.

Use of sturdy gloves, non-skid

footwear, and safety glasses is 

recommended.
5. Use extra care when handling

fuels. They are flammable and the 

vapors are explosive. Observe the 

following care:

Use only an approved container.
Never remove fuel cap or add 

fuel with the power source running. 

Allow engine and exhaust 

components to cool down before 

refueling.

Do not smoke. Never refuel 

indoors.

Never store the product or fuel 

container inside where there is an 

open flame, such as near a water 

heater.

If fuel is spilled, do not attempt to 

start, but move the product away 

from the spillage before starting.

Always replace and securely 

tighten the fuel cap after refueling.

If the fuel tank is drained, this 

should be done outdoors.
6. Store the product in a clean, dry

place protected from direct sunlight

only after the fuel tank has been

emptied and the product is cleaned.

The product may only be stored

inside under these conditions.
7. If the cutting mechanism strikes

any foreign object or the product

starts making unusual noises or

vibrations, shut off the power

source and allow the product to

stop. Disconnect the spark plug

wire from the spark plug and take

the following steps:

Inspect for damage,
Check for, and tighten, any loose 

parts,

Have any damaged parts 

replaced  or repaired with parts 

having equivalent specifications.

OPERATION

1. This product should not be used

for any other purpose than

described.
2. While operating, always wear

non-skid footwear, and long pants.

Do not operate this product when

barefoot or wearing sandals. Wear

protective glasses or goggles.
3. Thoroughly inspect the area

where the product is to be used

and remove all objects which can

be thrown by the product.

1-800-348-5004

Содержание 52623




















Отзывы: