BGNR-30 POWERED WALKIE REACH STACKER—OWNER’S MANUAL
17
ISSUE DATE: MARCH 16, 2016 REV.0 (PART # 038-969E)
6.2 OPERATE AND RUN THE REACH TRUCK
6.2.1 PREPARING
Before the Reach Truck can be commissioned, operated or a load unit lifted, the driver must ensure that there is nobody within the
hazardous area.
Checks and operations to be performed before starting daily work
• Make sure the Emergency brake switch is depressed (6).
• Make sure the battery is connected.
• Insert the key in the key switch (14) and turn it to the right as far as it will go.
• Test the warning signal switch (13).
Visually inspect the entire Reach Truck (in particular wheels and load handler) for obvious damage.
6.2.2 TRAVEL, STEERING, BRAKING
Do not drive the Reach Truck unless the panels are closed and properly locked.
Before operating the truck, check all controls and warning devices for proper operation.
If any damage of fault is found, don’t operate truck until corrected.
WARNING