BGNR-30 POWERED WALKIE REACH STACKER—OWNER’S MANUAL
7
ISSUE DATE: MARCH 16, 2016 REV.0 (PART # 038-969E)
DEALER INFORMATION
Name:
Contact:
Telephone:
2.1 WARRANTY INFORMATION
Thank you for purchasing Blue Giant products. We appreciate
your business, and are confident that our product will serve you for
many years to come. In the event that you experience a problem
with our product, our Warranty Center is here to support the
Blue Giant product(s) that you have purchased.
To validate warranty on recently purchased equipment,
please complete and submit your information with our
online Warranty Registration at
www.bluegiant.com
.
For more information about Blue Giant Warranty Support,
please contact your local Blue Giant Equipment dealer,
representative or authorized partner near you. You may also visit
www.bluegiant.com or phone 1.905.457.3900.
* Note that failure to validate warranty at the time of receipt can
seriously affect the outcome of any claim.
2.3 MANUFACTURER’S NOTE
This industrial truck has been carefully inspected and tested at
the manufacturer’s plant prior to shipment, but should be checked
upon receipt for transport damage. Any observed transport
damage is to be listed on the signed copy of the freight document.
Notify the freight forwarder of any damage WITHIN 48 HOURS.
2.0 INTRODUCTION
The following is a quick reference to important procedures that
must be followed while using the industrial truck. It is not intended
to cover, or suggest that it does cover, all procedures necessary to
ensure safe operation. All operators should be aware of and abide
by all workplace safety regulations applicable to the operation of
the industrial truck. These laws and regulations include but are not
limited to:
• The Occupational Safety and Health Act (USA)
• Occupational Safety and Health Acts for Individual States
(USA)
• Canadian Material Handling Regulations
For additional information on these regulations as well as industry
standards that may apply to this product, please contact:
American National Standards Institute (ANSI)
1430 Broadway
New York, NY 10018
Telephone: (212) 642-4900
Also a member of:
Loading Dock Equipment Manufacturers
A Product Section of Material Handling Industry of America
A Division of Material Handling Industry
8720 Red Oak Blvd, Suite 201
Charlotte, NC, 28217-3992
Telephone: (704) 676-1190
2.2 EXCLUSION OF LIABILITY
The manufacturer assumes no liability for damage or injury to
persons or property which occur as a result of defects or faults
in or incorrect use of dock equipment. The manufacturer also
assumes no liability for lost profits, operating downtimes, or similar
indirect losses incurred by the purchaser. Injury to third parties,
irrespective of its nature, is not subject to compensation.
The manufacturer reserves the right to make changes at any
time to the modules, components, and accessories, concurrent
with its continuing product development program. Specifications,
operating instructions, and illustrations included in this manual are
subject to change without notice. Please contact manufacturer for
the latest information.
