Blue Giant BGL-22, Руководство пользователя

Страница: 72 / 130

10-3.PUMP MOTOR.
Refer to paragraph 9-2.
10-4.DRIVE MOTOR.
The drive motor exposed surfaces should be cleaned
at least once a month to assure proper cooling of
motor. Use an air hose to blow dust off of motor sur-
faces.
10-4.1.Motor Removal
1. Remove the drive wheel (13) as described in
paragraph
7-1.
2. Remove the brake (1, Figure 10-3 ) as described
in paragraph 6-1.1.
3. Remove the steering arm as described in para-
graph
5-2.2.
4. Note routing of cables to ensure proper installa-
tion.
5. Tag the cables connected to the drive motor; then
disconnect these cables from the drive motor.
6. Remove three screws (26, Figure 12-1 ) and three
lock washers (27) to free brake plate (17) from
motor (17,
Figure 10-3 )
7. Remove eight screws (4), eight lock washers (5)
and eight flat washers (6).
8. Remove drive motor (17) from transmission (12).
9. Remove the nut and gear from the shaft of motor
(17).
10-4.2.Motor Installation
1. Install the gear and nut on the shaft of motor (17).
2. Install drive motor onto transmission. Make sure
the gears align.
3. Reinstall eight screws (4), eight lock washers (5)
and eight flat washers (6) to secure the motor to
the transmission.
4. Install brake plate (17, Figure 12-1 ) on the motor
and secure with three screws (26) and three lock
washers (27)
5. Position cables as noted in removal and recon-
nect cables to the drive motor.
6. Reinstall the brake as described in paragraph
6-1.1.
7. Reinstall the steering arm as described in para-
graph
5-2.3.
8. Install the rear compartment covers as described
in paragraph
5-3.
10-5.DEADMAN SWITCH
10-5.1.Replacement
1. Turn off the key switch (6, Figure 12-22 ) and dis-
connect the batteries.
2. Remove two screws (4, Figure 12-6 ) and middle
cover (5).
3. Disconnect the harness from deadman switch
(29,
Figure 12-6 ).
4. Remove two screws (21) and deadman switch
(29).
5. Install new switch (29) and secure with two
screws (21).
6. Reconnect the deadman switch wiring.
7. Check for proper operation of switch (29).
8. Install middle cover (5) and secure with two
screws (4,
Figure 12-6 ).
9. Reconnect the batteries and turn on the keyswitch
(6,
Figure 12-22 ).
72