Blue Bird VISION 2011, Руководство водителя

Страница: 77 / 140

75
p r e t r i p i n s p e c t t i o n
instrumentation & driver’s Alert checks
11. Enter the bus. If the bus is equipped with an electrically-operated or air-
operated door, ensure that the emergency release is not tripped. Be seated
in the driver’s seat. Insert the ignition key and turn it to the first On position,
but do not start the engine. All the instrument panel lights and the Message
Display Center illuminate.
11.1 Visually scan the lights, watching for any that do not illuminate. The
gauges sweep during their initialization process. Then the indicator
lights and Message Display module change to their normal monitor-
ing mode. Turning the ignition switch to On awakens the Multiplex
system. Certain conditions, such as a locked vandal lock or unlatched
emergency exit, may cause audible alerts. Audible alerts may also be
heard if the Message Display Center has recorded error codes.
11.2 Note the condition of the battery charge as indicated by the instru-
ment panel voltmeter. Fully charged batteries are necessary to com-
plete the pre-trip inspection.
11.3 Turn on the interior dome lights. Walk toward the rear of the bus,
correcting any conditions (such as unlatched emergency windows,
roof hatches, or latched rear emergency door vandal lock) that were
alerted when the ignition switch was turned on.
11.4 Return to the Driver’s seat. Turn off the dome lights. Test other equip-
ment switches in the upper panel of the side console (varies accord-
ing to options).
ü If Vanal lock or other alerts are indicated, turn on dome
lights and correct the condition.
ü
Return to seat and check other left console devices.
ü
Engage door control.
ü All indicators & Message Display illuminate during
initialization.
ü After initialization, voltmeter indicates full battery
charge.