MICRO - BIRD
37
FLOOR COVERING
Good floor covering maintenance is essential for long service.
The covering should be swept daily, if at all possible, to avoid dirt
from being ground into the covering.
Do not
use sweeping compounds as this may cause a deterio-
ration of the covering.
Do not
let such substances as road salt build up. Mop the floor
frequently as you think it is needed. Use a mild detergent with
water and rinse thoroughly.
Do not
use solvent-type cleaners. Mop any excess water up as
soon as possible, because this may cause the covering to separate
from the sub-floor. If separation does occur and “bubbles” appear,
cut the material to gain access to the underside. Clean the under-
side of the covering and sub-floor where separated and re-bond
with a good quality contact cement.
DESTINATION SIGNS
Two Station Sign
- Rear lighted, sign material masonite with
lettering on both sides. Lubricate interior door hinge.
DRAIN HOLES
There are two drain holes
located in each floor section; one
right hand side under window,
and one left hand side under
window. These holes should be
cleared of all debris quarterly to
allow for water drainage.
Содержание Micro Bird
Страница 1: ......
Страница 32: ...MICRO BIRD 31 30 Days Annually Quarterly Daily 1000 Miles 2000 Miles Yearly Thereafter...
Страница 34: ...MICRO BIRD 33 Fig 3 Fig 4 Fig 5 WINDOW SHOWN WITH FRAME DISASSEMBLED...
Страница 43: ...Part Number 1974559 Blue Bird Corporation P O Box 937 Fort Valley GA 31030...
