Blue Bird Micro Bird, Руководство оператора

Страница: 12 / 43

MICRO - BIRD
11
2. Rotate the swivel clamps so as to clear the front retaining
channel frame.
3. Lift the forward edge of the cushion 2 to 3 inches and pull
cushion forward to remove.
Installation
1. Place the rear edge of the cushion down on the base portion
of the seat frame. Lifting the forward edge of the seat frame 2
to 3 inches, slide the cushion to the rear to engage the positive
type clamp into the rear retaining channel.
2. Lower the forward edge to the frame making sure the swivel
clamps are inside the frame and the positive type clamps are
secure on the rear retaining channel.
3. Rotate the swivel clamp to engage the forward retaining
channel frame.
4. Tighten with phillips type screw driver until clamps do not
rotate.
SEAT CUSHION REMOVAL & INSTALLATION - DOT
SEAT BELT SEATS
Removal
1. Loosen the two front swivel type clamps at the front under-
side of the cushion with a phillips type screw driver.
Caution - Do not remove clamps.
2. Rotate the swivel clamp located at the rear underside of the
seat cushion.
3. While lifting at the rear edge of the cushion, pull the cushion
to the rear and remove.
Installation
1. Place the forward edge of the cushion 2 inches to the rear of the
front retaining clamps. Slide the cushion forward engaging
the positive clamps onto the forward retaining channel.
2. Lower the rear edge of the frame and rotate the swivel clamps
so they engage the square tube crossmember.
3. Tighten with phillips type screw driver until clamps do not
rotate.