MICRO - BIRD
32
GLASS REPLACEMENT
The glass used in your bus meets Federal Motor Vehicle Safety
Standards 201 and 217. Therefore, when a glass is broken, it should
be replaced with identical glass.
The following instructions are for replacing glass in the side
split sash window, rear and rear side vision, entrance door.
WARNING: When replacing broken or damaged glass use
extreme care at all times to prevent personal injury. This in-
cludes the use of proper replacement parts, tools, and personal
protective equipment such as gloves and safety eyeglasses.
SPLIT SASH
1.
Remove four screws securing window to bow (Fig. 1).
2.
Pull window to inside of body and remove (Fig. 2).
3.
Remove six screws (three on each side of window) holding
main assembly together (Fig. 3).
4.
On bottom glass simply pull aluminum channel off top and
bottom of glass (Fig. 4).
5.
To remove glass from top part of window, remove six screws
holding frame around glass (Fig. 5).
6.
Reassemble window by reversing above procedure.
7.
Apply weather seal caulking around window frame on outside
of body to prevent leaking.
Fig. 1
Fig. 2
Содержание Micro Bird
Страница 1: ......
Страница 32: ...MICRO BIRD 31 30 Days Annually Quarterly Daily 1000 Miles 2000 Miles Yearly Thereafter...
Страница 34: ...MICRO BIRD 33 Fig 3 Fig 4 Fig 5 WINDOW SHOWN WITH FRAME DISASSEMBLED...
Страница 43: ...Part Number 1974559 Blue Bird Corporation P O Box 937 Fort Valley GA 31030...
