Blue Bird Micro Bird, Руководство оператора

Страница: 11 / 43

MICRO - BIRD
10
SEATS & SEAT BELTS
DRIVER’S SEAT BELT OPERATION
For driver’s seat belt operation refer to chassis manual. if you
failed to receive such a manual, contact the chassis manufacturer’s
closest dealership immediately to obtain one.
PASSENGER SEAT BELT OPERATION IF SO EQUIPPED
Individual lap belts for passengers are of the non-retracting
design. Insert the catch into the buckle, test for the assurance of a
latch fit, and pull the loose end of the buckle-end strap until the belt
fits snugly across the lower hips. The buckle can be released
depending on the buckle type, by either lifting the outboard edge,
or by pushing button in the center of buckle. The adjustable end
can be moved outward on its strap by turning 90 degrees to the
strap and pulling.
SEAT BELT INSPECTION AND MAINTENANCE
Inspect seat belt assembly frequently. Anytime assembly
does not work properly, or if there are any defects in the webbing
(i.e. torn or frayed), the seat belt must be replaced as soon as
possible to insure passenger safety.
Hand wash webbing with warm water and mild soap. Rinse
thoroughly and dry in the shade. Do not bleach or redye, because
such processing may severely weaken the assembly.
WARNING: Be sure the lap belt is fitted snugly across the
hips, not the waist. Failure to do so may increase the chance of
injury in the event of a collision.
WARNING: If seat cushions are removed for maintenance,
they must be installed using the following instructions. Failure
to comply with these instructions could result in injury from
unattached seat cushions in the event of an accident.
SEAT CUSHION REMOVAL & INSTALLATION - DOT
SEATS
Removal
1. Loosen the two front swivel type clamps at the front under-
side of the cushion with a phillips type screw driver.
Caution - Do not remove clamps.