Blu K99597F15, Инструкция по эксплуатации

Страница: 8 / 21

RECEIVING UNIT
1. Uncrate the unit.
2. Check to make sure unit is in tact; no visible freight damage including dents, dings, scratches, missing
parts. If you notice any damage to your unit, please call (800) 833-1106.
BEFORE TURNING UNIT ON
1. Look in refrigerated base compartment, remove filter.
2. Remove louvered panel over compressor compartment.
3. Insert filter in channels located under the compressor compartment area.
4. On back side of the unit, remove the access panel that covers the compressor compartment. This
is your glycol system. (See Fig. 3) The glycol used is a non-toxic food grade (propylene) glycol.
5. Check fill tank level (small plastic tank). A small amount of glycol may spill from tank during shipment.
Prior to startup, tank should be approximately 1/2 full. Add 35% Propylene Glycol if necessary.
6. Next, inspect the two insulated hoses located in the back of the compressor compartment. For proper
circulation, the hoses must be free of kinks.
7. Reattach access panel.
8. Cut zip-tie securing electrical cord and plug cord into wall socket.
4. STARTUP INSTRUCTIONS
USE ONLY
PROPYLENE GLYCOL
(35% CONCENTRATION)
OPERATING
RANGE
LABEL ON FILL TANK
FIG. 3
PAGE 7
PREP TABLE