Blu K99597F15, Инструкция по эксплуатации

Страница: 5 / 21

PAGE 4
PREP TABLE
2. RECEIPT INSPECTION
All Kairak products are factory tested for performance and are free from defects when shipped. The utmost
care has been taken in crating this product to protect against damage in transit.
Carefully inspect your Kairak unit for damage during delivery. If damage is detected, you should save all
crating materials and make note on the carrier’s Bill of Lading describing the damage. A freight claim should
be filed immediately. If damage is subsequently noted during or immediately after installation, contact the
respective carrier and file a freight claim. There is a fifteen (15) day limit to file freight damage with the carrier.
Under no condition may a damaged unit be returned to Kairak without first obtaining written permission
(return authorization). You may contact Kairak customer care at (800) 833-1106.
3. INSTALLATION
3A - UNPACKING
Inspect equipment for shipping damage prior to installation. If shipping damage is found, save the packing
materials and contact the carrier within 5 days of delivery.
Some components are packed and shipped inside the lower storage cabinet to avoid damage during
shipment. Remove these items from the cabinet and remove packing materials. See “Installing Loose Parts”
for instructions. If unit is equipped with shelves, cut and remove the plastic ties holding the shelves in place.
3B - LOCATING THE EQUIPMENT
Prep table models of lengths above 36” can be installed with no clearance at the back and sides of the
units. Units 36” or shorter have a rear mount compressor and require a minimum clearance of 3 inches
at the back and sides of the unit. This allows for sufficient air circulation of the condensing unit. Failure to
provide adequate ventilation may cause severe compressor damage, and will void warranty.