SERVICING INSTRUCTIONS (continued)
REPLACE HEATING ELEMENT
Remove tank lid assembly as described on page 13.
Remove two hex nuts holding element to cover. Pull element
from mounting holes.
Reassemble in reverse order.
REPLACE SOLENOID
Symptom:
$XWRPDWLFEUHZHUZLOOQRWÀRZZDWHUR
r,
automatic brewer drips continuously from brew head.
NOTE
: Wrench p/n 86660 is designed to allow easy removal of
the hoses from the plastic solenoid valve.
IMPORTANT:
Shut-off water and electric supply to brewer
before removing hoses or wiring.
5HPRYHZDWHUVXSSO\ÀDUH¿WWLQJ
a.
6OLGHWKH´HQGRIWKHZUHQFKRYHUWKHÀDWVRQWKH
LQOHW¿WWLQJRIWKHYDOYH
b.
+ROGWKHZUHQFKWRSUHYHQWWKHLQOHW¿WWLQJIURPWXUQLQJ
ZKLOHLQVWDOOLQJRUUHPRYLQJWKHLQOHWZDWHUVXSSO\ÀDUH
nut.
Remove braided hose:
a. Slide the 7/16” end of the wrench between the valve
body and the white ring on the extreme end of the metal
KRVH¿WWLQJ
b. Pressure on the white ring toward the metal ferrule
releases the clinch ring, allowing the hose to be easily
slid off of the solenoid bypass outlet.
c. Install hose on new valve by pressing end of hose onto
bypass outlet until it is fully seated.
Disconnect wiring.
Remove two screws holding solenoid to access door.
Reassemble in reverse order.
CLEAN SOLENOID SCREEN
Symptom:
$XWRPDWLFEUHZHUZLOOQRWÀRZZDWH
r.
Unplug power cord or turn circuit breaker
OFF
. Turn
OFF
and
GLVFRQQHFWZDWHUVXSSO\IURPEUHZHULQOHW¿WWLQJ
8QVFUHZZDWHULQOHW¿WWLQJIURPVROHQRLG
Using needle-nose pliers, withdraw strainer screen from solenoid.
Clean screen under faucet. A stiff bristle brush may be used if
necessary.
Reinsert screen in solenoid. Be careful to maintain correct
orientation. (The
OPEN END
of the screen goes in
FIRST
.)
Reassemble in reverse order.
STRAINER
SCREEN
WASHER
WATER INLET
FITTING
IL1608
Fig. 12 Clean Strainer Screen
Fig. 11 Remove Faucet
Supply from Solenoid
BYPASS
OUTLET
WHITE
CLINCH
RING
METAL FITTING
SLIDE WRENCH BETWEEN
VALVE AND HOSE FITTING
PRESS CLINCH RING TOWARD
METAL FITTING TO RELEASE
#86660 WRENCH
WRENCH
METAL FITTING
CLINCH RING
IL1699
IMPORTANT:
When replacing
heating element, also replace
seal gaskets.
14
625 p/n 2M-75873 8792, 8793 Dual Coffee Brewer
