Blonder tongue Clearview 4:2, Руководство пользователя

Страница: 6 / 24

6 Clearview 4:2
User Manual
2.2 Product Application & Description (Continued)
2 4 5 6
1 3
7
8
Power LED:
If the LED is Green, the AC power is detected. If the LED is Off, it will indicate one of the following:
(i) AC power is not connected, or
(ii) AC power is connected but the power supply is defective. Unit must be sent to factory for repairs.
Temperature LED:
• Solid Red = Unit temperature is critically high.
• Solid Amber = Unit temperature is high.
• Solid Green = Unit temperature is normal.
IP Video: RJ45 for 1000Base-T Ethernet (GigE) interface; used for IP Video Input and Output.
Control: RJ45 connector for 1000Base-T Ethernet (GigE) Ethernet interface for monitoring and configuring the unit via
standard web browser. Only a static IP address can be assigned to this interface. (Factory Default: "172.16.70.1")
IP Reset: When pushed and held for 5 seconds, temporarily resets the IP address, Usernames, and Passwords to Factory
Default. Activation is indicated by the Power LED blinking twice. Default values are as follows:
IP address = 172.16.70.1
Username = Admin (case-sensitive)
Password = pass (case-sensitive)
NOTE: Resetting power will revert IP and login credentials back to what has been configured by the user. The effects
of activating the IP Reset feature are temporary and only last until the unit is power cycled.
Status LEDs # 1 through 24:
• Off = Transcode channel is not enabled.
• Solid Green = Transcode channel is configured and currently transcoding without issue.
• Solid Red = Transcode channel is experiencing an error or has failed. See log for details.
1
2
3
4
5
6
Input Power Assembly and Fuse:
IEC 14 power inlet plug – rated 110-230 VAC; 0.9/0.45 A; 60/50 Hz; equipped with
Slo-Blo, 3.0A, 250 V Fuse. The operation of the power assembly can be monitored through the User Interface.
Chassis Fans:
Fans used to cool the unit. The operation of these fans can be monitored through the User Interface.
7
8