Blonder tongue Clearview 4:2, Руководство пользователя

Страница: 13 / 24

13 Clearview 4:2
User Manual
5.3 “Time” Screen
The “ Time ” tab (Figures 5.3a to 5.3d) is a “read and write” screen. Time settings for the system and the event log are
configured here.
Current Time at Page Load
Clearview: read-only display of the unit's current date and time, shown in UTC format. The time is adjusted for states,
territories and countries that use time change (ie. Eastern Standard Time and Eastern Daylight Time).
Client: read-only display of the current Client, or local browser, date and time, shown in UTC format with time zone.
The time is adjusted for states, territories and countries that use time change (ie. Eastern Standard Time and Eastern
Daylight Time).
1
2
Figure 5.3a - “Current Time at Page Load”
1
2
Figure 5.3b - “Time Settings”
3
4
Time Settings
Time Zone: user is able set the time zone, shown in UTC format.
Time:
Clicking the button will synchronize the Clearview time to Client time. This requires that the selected time zone
and client system time are correct. After synchronization, the Clearview time shown may lead or lag the Client time by
a small margin.
3
4
Figure 5.3c - “NTP Settings”
5
6
7
NTP Settings
Enable NTP System Time Synchronization: Enable ( ) or Disable ( ) System Time Synchronization.
Use Custom NTP Servers: Enable ( ) or Disable ( ) the Custom NTP Servers. Network Time Protocol (NTP) uses one
or more IP addresses that the platform can sync time to. When enabled, the three fields under are usable.
5
6
7