manualshive.com logo in svg

Blonder tongue 6522-PIL, Инструкция по эксплуатации

Поделиться
Скачать
Blonder tongue 6522-PIL Скачать руководство пользователя страница 6

6 EQAM-420A 

Instruction Manual

Section 2 — Product Summary

2.1 Revision history & Reason

This is the third issue of this Instruction Manual.
The reason for this revision was to add the requirements for the EQAM-420A to operate in Multi Program Transport Stream 
(MPTS) mode.

2.2 Product Application & Description

Application:
EQAM-420A (EdgeQAM – 420A) is designed to allow CATV operators to aggregate multiple SDTV/HDTV programs 
received in IP format and to deliver them over a standard coaxial distribution network.

The EQAM-420A is capable of accepting unencrypted (clear) 1000Base-T Ethernet (GbE) streams in one of the following 
two modes:

      Mode 1:  up to thirty-two (32) MPEg-2/h.264 Single Program Transport Streams (SPTS)

 Mode 2:  up to eight (8) MPEg-2/h.264 Multi Program Transport Streams (MPTS), each MPTS with maximum six (6) 
programs not to exceed 38.8 Mbps.

The input streams are aggregated in up to eight (8) QAM RF channels in the 54-996 Mhz range. The EQAM-420A can 
be configured with one or two QAM output modules, each capable of delivering four (4) adjoining QAM channels. Each 
QAM channel can contain up to four (4) programs. 

The EQAM-420A allows the operator to maintain the QAM RF output unencrypted, or to encrypt it with Pro:Idiom™ 
against content piracy. 

Comprehensive remote monitoring and control is accomplished using any standard Web browser via a front-panel 
10/100BaseT Ethernet connection.

Features:
• Mode 1: Accepts up to thirty-two (32) MPEg-2/h.264 Single Program Transport Streams (SPTS)
• Mode 2: Accepts up to eight (8) Multi Program Transport Streams (MPTS), each MPTS with maximum six (6) programs    
   and not to exceed 38.8 Mbps
• Configurable with one or two modules, each with four 

(4

) adjacent QAM channels, for a total of eight 

(8

) QAM channels

• Comprehensive gUI-based menu for remote monitoring and control via standard Web browsers
• User-selectable QAM 16, 32, 64, 128, and 256 modulation modes
• Provides a front-panel RF test point (at 20dB below primary QAM output)
• Provides SNMPv2 for product and network management
• Accepts variable and constant bitrate streams
• Provides Null packet insertion and deletion

 To utilize the Pro:Idiom

TM

 encryption feature, the input streams must meet the Pro:Idiom

TM

 

requirements. All QAM RF outputs will be encrypted regardless of the number of output modules 

present or the number of QAM RF channels assigned on each module.

Содержание 6522-PIL









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды