Blonder tongue 6522-PIL Скачать руководство пользователя страница 30

Страница: 30 / 40

30 EQAM-420A

Instruction Manual

6.9 "Time" Screen

The “Time” screen (Figure 6.8) allows you to set the current date and time for the EQAM-420A. To remain compliant with ATSC

and cable standards, it is important to have the accurate date and time stamps. For this reason, it is recommended to use the

"Automatic" option which allows the unit to automatically acquire time settings from a "Time Server" - you must enter the IP

address of the time server (see of Section 6.7.1 for details). The time server specified must support the Network Time

Protocol (NTP) in order for automatic time acquisition to work properly. The unit would refresh the date and time settings from

the Time server every 20 minutes. If, however, an internet connection is not available, the date and time can be entered manually.

The unit is capable of adjusting the Day Light Saving (DST) time settings automatically, provided the “Automatically Adjust for

Daylight Savings Time” in Figure 6.8 is selected “Yes”.

Figure 6.8 - "Time" Screen

Содержание 6522-PIL









































Результаты поиска

Содержание 6522-PIL

Отзывы:

Бренды по названию

Популярные бренды

Blonder tongue 6522-PIL, Инструкция по эксплуатации

Результаты поиска

Содержание 6522-PIL

Отзывы:

Бренды по названию

Популярные бренды