Operation
21
Pulse Plus
OVEN OFF
COOL
DOWN
COOK
FAN DELAY TIMER
TIMER
SOLID STATE
THERMOSTAT
LIGHT OFF
OVEN READY
1
2
4
6
3
5
7
Figure 12
CONTROL DESCRIPTION
1. SELECTOR SWITCH - controls power to the
oven for cook or cool down.
2. AMBER FAN DELAY LIGHT - indicates the
oven is in pulse plus.
3. FAN DELAY TIMER - activates pulse plus for
0-10 minutes. The blower and burners pulse
on for 30 seconds and off for 30 seconds for
the duration of time set.
4. RED INDICATOR LIGHT - indicates oven is in
the cook timer cycle.
5. COOK TIMER - activates an electric buzzer
that sounds when the cook time expires.
6. OVEN READY LIGHT - when lit indicates
burner operation. When the light goes out, the
oven has reached operating temperature.
7. SOLID STATE THERMOSTAT - allows either
8 preĆset temperatures to be selected in acĆ
cordance with customer requirements, or an
infinite selection of temperatures from
0Ć500
_
F (0Ć260
_
C). (infinite control shown)
OPERATION
1. Turn the SELECTOR Switch (1) to
COOK
.
2. Set the SOLID STATE THERMOSTAT (7) to the
desired cook temperature.
3. Preheat the oven until the OVEN READY
LIGHT (6) goes out.
4. Load product into the oven.
5. Set FAN DELAY TIMER (3) for the desired time
for pulse plus operation.
6. Set the COOK TIMER (5) for the desired cook
time.
7. When the buzzer sounds, remove product
from the oven. Turn the TIMER (5) knob to
OFF
to silence the buzzer.
8. Turn the SELECTOR SWITCH (1) to
OVEN
OFF.
WARNING!!
A complete five minute shutdown must be
observed before the oven is relighted.
