Blitz MONSUN Fast R, Руководство по эксплуатации

Страница: 5 / 32

0 Foreword
4
0.1 How to read and use the instruction manual
0.1.a Importance of the manual
This INSTRUCTION MANUAL has been written to guide you through the INSTALLATION, USE and MAINTENANCE of
the compressor purchased.
We recommend that you strictly observe all the indications given within as the ideal operational efficiency and lasting
wear of the compressor depend on the correct use and methodical application of the maintenance instructions given
hereafter.
Remember that when any doubts or inconveniences arise it is a good rule to always contact the AUTHORISED
SERVICE CENTRES. They are at your complete disposal for any explanations or jobs required.
The Manufacturer therefore declines all liabilities regarding the incorrect use and poor maintenance of the compressor.
The INSTRUCTION MANUAL is integral part of the compressor.
Ensure that any up-dates forwarded by the Manufacturer are actually added to the manual.
If the compressor is sold on at a later date the manual must be given to the new owner.
0.1.b Conserving the manual
Use and read the manual with care being careful not to damage any part of it.
Do not remove, tear or re-write any parts of the manual for any reason whatsoever.
Keep the manual in a dry and sheltered place.
0.1.c Consulting the manual
This instruction manual is made up of the following:
•
FRONT COVER WITH MACHINE IDENTIFICATION
•
DETAILED INDEX
•
INSTRUCTIONS AND/OR NOTES ON THE COMPRESSOR
The model and serial number of the compressor to which the manual refers and that you have purchased is found on
the FRONT COVER.
The various SECTIONS in which all the notes relative to a certain subject are found in the INDEX.
All the INSTRUCTIONS AND/OR NOTES ON THE COMPRESSOR aim at pointing out safety warnings and
procedures required to use the compressor correctly.
0.1.d Symbols used
The SYMBOLS pointed out below are used throughout this manual and their purpose is that of drawing the operator’s
attention, informing the latter how to behave and how to proceed in each operational situation.
READ THE INSTRUCTION MANUAL
Read the use and maintenance manual carefully before installing and starting the compressor.
GENERAL HAZARDOUS SITUATION
An additional note will point out the type of hazard involved.
Meaning of the indications:
Warning!
This points out a potentially hazardous situation, which if ignored, could cause personal injury and machine damage.
Note!
This enhances crucial information.
RISK OF ELECTRIC SHOCK
Warning: the electrical power supply of the compressor must be disconnected before doing any jobs on the
compressor.
RISK OF SCOLDING
Warning: be careful when touching the compressor as some parts of it could be very hot.