28
Charge on.
Max Device Num-
ber
The maximum number of charge points allowed in a group/LAN. This value
cannot be modified by users.
Connectivity
Specifies whether the charge point should always be connected to Internet
using Auto, Ethernet, or 3G. Default value is Auto.
Ping URL
Address of the host that the charge point will ping for the Ethernet
connection. This value will automatically set to the address of “Server URL”.
Local Load
Management
Enable or Disable local load management function. This function can only be
enabled in a
primary
charge point.
HINT:
If user changes “Device Mode” setting, then related settings will also change automatically
such as “Connectivity”, “Local Load Management”. The default value is as follow:
Standard Alone
Primary
Secondary
Primary
LAN IP
Not used
Default value, not changeable Not used
Start Port
Not used
Default value, not changeable Not used
Max Device Number
Not used
Default value, not changeable Not used
Connectivity
Auto
3G, not changeable
Wi-Fi, not changeable
Ping URL
User setting
User setting
User setting
Local Load Management
Disable, not changeable Enable
Enable
4.3.4.1
Ethernet Settings
Link Mode
Configure the Ethernet port to use DHCP or Static IP. If you select Static IP from
the dropdown menu, you need to enter values for IP Address, Netmask, and
Default Gateway fields.
IP Address
The IP address of the charge point.
Netmask
The subnet mask.
Default
Gateway
The default gateway.
Primary DNS
The primary Domain Name Server (optional).
Secondary DNS The secondary Domain Name Server (optional).
