9
Charge on.
3.3 Install the Charger
1. Drill bolt holes in the wall for the mounting bracket.
Note:
Follow applicable accessibility requirements for the mounting position. The unit shall be mounted at
a sufficient height from ground such that the height of the storage means for the coupling device is located
between 24 inches (600 mm) and 4 feet (1.2 m) from ground per NEC Article 625.
Masonry Walls
Sheet Rock and Wood Stud Walls
Figure 3-1. Mounting Bracket
2. Secure the main body mounting bracket to the wall with appropriate bolts, as follows:
a. For masonry walls, use M8 expansion bolts.
b. For finished walls supported by wood studs, use M8x18mm lag bolts with lock washers.
