44
Play – AUX/Navigation
Additional devices (AUX)
Three additional devices (such as the reversing camera) can be
connected to the Chicago IVDM-7002, as well as the IVSC-3302
or IVSC-5502 converters. The AUX sources are activated in the
setup menu. Please read the section “Select an External Signal
Source” in the chapter on the “Setup Menu” to activate this func-
tion.
1.
On the device or on the remote control: Press the SRC
key as often as is needed for the source you want to be
shown on the monitor.
✔
The chosen AUX source appears briefly on the monitor’s
top line.
AUX 1
Brief AUX display with retracted monitor, followed by
display of the time.
Note: If an IVSC is connected it will be available as an
additional signal source. All the connecting sources
can then be displayed on the Chicago through the
IVSC.
Navigation
A TravelPilot (e.g. the DX-V) can also be connected to the Chicago
IVDM-7002 in addition to the AUX sources.
1.
On the device or on the remote control: Press the NAVI
key.
✔
The screen enters navigation mode.
2.
Press the key again to return to the previous operating
mode.
Note: The on-screen menu (OSD) is not available if
the navigation system is connected via the RGB in-
put.