8
Press the
button
3
.
The locking mechanism of the control panel
is unlocked.
Pull the control panel straight out of the
device and to the left.
Notes:
After removing the control panel
from the device, the device switches
off.
All the current settings are saved.
Any CD already inserted in the de-
vice remains there.
Attaching the control panel
Push the control panel into the guides
of the device from the left to the right.
Carefully push the left side of the con-
trol panel into the device until it clicks
into place.
Note:
When attaching the control panel, make
sure you do not push on the display.
쏅
쏅
•
•
•
쏅
쏅
Switching on/off
There are various ways of switching the de-
vice on/off:
Switching on/off using button
1
To switch on the device, press button
1
.
The device switches on.
To switch off the device, press and
hold down button
1
for longer than
two seconds.
The device is switched off.
Switching on/off using the
vehicle ignition
The device will switch on/off simultaneous-
ly with the ignition if the device is correctly
connected to the vehicle’s ignition and you
did not switch the device off by pressing
button
1
.
The device can also be switched on with
switched-off ignition.
Press the button
1
.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
쏅
쏅
쏅
Theft protection
Switching on/off
01BremenMP76US_gb.indd 8
01BremenMP76US_gb.indd 8
7/28/06 11:28:24 AM
7/28/06 11:28:24 AM