69
Setting volume decrease for voice output
If a navigation system is connected, the voice output of the navi-
gation system is mixed with the sound of the currently set signal
source. In the process, the volume of the signal source is
decreased. The percentage decrease of the volume can be ad-
justed.
The setting “+0” mutes the sound of the signal source for the
duration of a voice output.
With the setting “+100”, the volume of the signal source is not
decreased during a voice output.
1.
Touch the
Setup
Setup
button on the touch screen menu and
then touch the
button.
2.
First, touch the
button, followed by the
button.
With the Chicago IVDM-7003, touch the
button twice.
✔
The “Navigation” AUDIO submenu is displayed.
EXIT
EXIT
PREV
PREV
RESIDUAL
RESIDUAL
+50
+50
Navigation
Navigation
3.
Activate “RESIDUAL” (residual value) by touching it.
4.
Repeatedly touch to the left or right of the scale to adjust
the desired volume difference.
5.
Touch the
EXIT
EXIT
button twice to exit the setting.
Sending a test sound to the speakers
This option allows you to send a test sound to the connected
speakers to test its proper function.
1.
Touch the
Setup
Setup
button on the touch screen menu and
then touch the
button.
2.
First, touch the
button, followed by the
button.
With the Chicago IVDM-7003, touch the
button twice.
✔
The “TEST TONE” AUDIO submenu is displayed.
EXIT
EXIT
PREV
PREV
FRONT L
FRONT L
FRONT R
FRONT R
REAR L
REAR L
CENTER
CENTER
SUB WOOFER
SUB WOOFER
REAR R
REAR R
Test Tone
Test Tone
AUDIO setup menu
BA IVDM-7003 Teil 3 GB
03.02.2006, 8:34 Uhr
69
