68
3.
Select “FRONT L/R” (left/right front speaker), “REAR L/R”
(left/right rear speaker), “CENTER” (center speaker) or
“SUB WOOFER” by touching it. The
/
buttons
can be used to scroll back and forth in the menu.
Note: Deactivated speakers cannot be selected. For
instructions, please read the section “Speaker setup”
in this chapter.
4.
Repeatedly touch to the left or right of the scale to
increase or decrease the speaker level for the selected
speaker.
5.
To confirm the setting, touch the
EXIT
EXIT
button.
6.
Repeat steps
3 - 5
to perform additional settings, or
6.
Touch the
EXIT
EXIT
button to exit the menu.
Setting the dynamic range
You can adjust the dynamic range between loud and soft
passages. For this purpose, the volume of soft passages is
increased and that of loud passages is decreased.
Note: The dynamic range can be set in increments from
“OFF” to “FULL” (maximum). Select the “FULL” set-
ting for full dynamic adjustment.
Note: For the Aspen IVDM-7003, the dynamic range
can be adjusted only if you called the setup menu in
DVD mode. The setting affects only the DVD mode.
1.
Touch the
Setup
Setup
button on the touch screen menu and
then touch the
button.
2.
First, touch the
button, followed by the
button.
✔
The “Dynamic Range” AUDIO submenu is displayed.
EXIT
EXIT
NEXT
NEXT
PREV
PREV
D.RANGE
D.RANGE
OFF
OFF
Dynamic Range
Dynamic Range
3.
Activate “D RANGE” (dynamic range) by touching it.
4.
Repeatedly touch to the left or right of the scale to
increase or decrease the dynamic range.
5.
Touch the
EXIT
EXIT
button twice to exit the menu.
AUDIO setup menu
BA IVDM-7003 Teil 3 GB
03.02.2006, 8:34 Uhr
68
