19
Theft protection
Activating the device code
In addition to a detachable control panel, the device is equipped
with a four-digit device code. The device code is set to 0000 at
the factory. With this setting, the coding is not active and the de-
vice can be switched on without code query after a voltage inter-
ruption.
To activate the coding of your device, you must enter a freely
selectable code. How to change the code is described in the chap-
ter “Setup menu” under “Changing the password”.
Note: Record your personal code and keep it in a safe
place. If you ever forget the code, the device cannot
be switched back on after a voltage interruption. In
this case, the device must be decoded by returning it
to a local dealer or sending it to our customer service
department.
Switching on coded devices after a voltage interruption
If a coded device is switched on after disconnecting the battery
voltage, e.g. in case of a repair to the vehicle, the code query
appears.
PASSWORD
PASSWORD
1.
Enter the four-digit code using the number buttons
0
to
9
on the remote control.
2.
Press the button to correct any incorrect entries.
3.
Confirm the entry with the
ENTER
button.
✔
The device switches on.
BA IVDM-7003 Teil 1 GB
03.02.2006, 8:32 Uhr
19
