Blaupunkt 5DA36251, Инструкция по установке и эксплуатации

Страница: 26 / 56

26
Prepare the appliance
A handle strip must be screwed into the filter pull-out. This can
be a supplied handle strip or one that is available as an
accessory
1.
Use the enclosed screws to secure the handle strip to the
filter-pull-out. ¨
2.
Insert the enclosed power cord into the appliance. ©
3.
Screw the four angle brackets into the appliance. Observe
the position of the screws. ª When doing so, screw in the
screws to a distance of 8 mm. «
Installation
Installati on
Installation
1.
Use the angle brackets to hang the appliance on the screws
and align it.
2.
Measure the distance from the appliance to the wall and
mark this on the filler strip.
3.
If required, shorten the filler strip to the required dimension.
4.
Remove the appliance and screw in the filler strip.
5.
Remount the appliance, align it and screw it in place.
Carefully screw in all screws.
6.
Establish the electrical connection.