www.blaubergventilatoren.de
11
KOMFORT EC LB/LBE S11
The control panel installation diagram is shown in Fig. 10. The room
temperature sensor is integrated into the control panel. For that reason
the control panel must be installed in a temperature balanced place, at least
1 m away from the heating equipment, doors and windows.
Fix the control panel to the wall using the screws and connect it to the air
handling unit using a supplied four-wire connecting cable.
The recommended cross sections for the cable between the control panel
and the unit is stated in the Table 5. The recommended minimum supply
voltage of the control panel is 11 V.
The control panel is supplied assembled and connected to the unit.
In case of need to re-install the control panel please follow the steps shown
in the Fig. 10.
Recommended cable length
from the wall surface is 90 mm
1
3
2
5
6
4
Fig. 10. Control panel mounting
WARNING
Do not lay the control panel cable in close proximity parallel to a power cable! Do not coil the cable from the control panel in
loops while laying it.
!
Table 5. Recommended cross section of the data cable between the control panel and the unit
Parameter
Value
Cable cross section
≥ 0,12 mm2
≥ 0,25 mm2
Cable length
up to 15 m
max. 50 m
KOMFORT_EC_LBE_v1(3)_EN.indd 11
11.08.2015 9:01:19
