18
www.blaubergventilatoren.de
KOMFORT EC LB/LBE S11
Function
Indication
16 Control panel temperature sensor correction
To correct the panel temperature sensor indications select
TEMPERATURE CORRECTION submenu from the Engineering menu and
press ENTER
.
Then use the
or
buttons to set the temperature correction
for the room temperature sensor installed in the control panel casing.
The default factory setting for the temperature sensor correction is -6°C.
To return to the Engineering menu without saving changes press EXIT
.
17 Default settings
To reset the controller settings to the factory defaults select DEFAULT
SETTINGS submenu from the Engineering menu and press ENTER
.
To confirm the reset press ENTER
.
To return to the Engineering menu without saving changes press EXIT
.
The default settings are given in Table 8.
18 Current temperature review
To review the current temperatures select the CURRENT TEMPERATURES
submenu from the Engineering menu and press ENTER
.
The display shows all the current temperature information.
If any temperature sensor of the ventilation unit is missing its
configuration value is displayed as OFF.
To return to the Engineering menu press EXIT
.
19 AUTO Mode (scheduled operation)
The AUTO mode enables scheduled operation of the ventilation unit. The
unit runs at the pre-set speed and temperature during the specified time
periods. The unit is in the Standby mode between the operating periods.
To activate the AUTO mode press AUTO
in the control panel
Main menu. Activation of the AUTO mode is confirmed with a tick
.
Table 6. Unit control and adjustment of operating parameters of the unit
KOMFORT_EC_LBE_v1(3)_EN.indd 18
11.08.2015 9:01:22
