Freshbox 100 WiFi
10
www.blaubergventilatoren.de
5.
To install an additional extract spigot, remove the
plug on the rear part of the unit.
Undo the screws, remove the plug and fix a spigot on
its place using screws.
6.
Fix the unit on the wall:
• Open the unit and remove the heat exchanger.
• Lift the unit, insert the drain pipe and unit spigots
into the corresponding wall-mounted air ducts.
CAUTION! REMOVE THE MAGNETIC PLUG FROM
THE EXHAUST GRILLE IF AN ADDITIONAL
EXTRACT SPIGOT IS NOT INSTALLED.
• Fix the unit on the wall using the supplied screws
and expansion anchors.
• Install the heat exchanger back and close the unit
door.
7.
Install the outer ventilation hood:
• Cut a part of the drain pipe protruding outside to
a length not more than 10 mm.
• Remove the foam excess.
• Fill the gaps between the air ducts with sealant.
• Fix the outer hood on the outer wall of the
building (see the ventilation hood installation
manual).
10 mm
min 3 mm
