12
www.blaubergventilatoren.de
KOMFORT LE
Function
Button / Button combination
Indication
After the unit is connected to power supply the display shows BLAUBERG logo and the LED light indicators do not glow.
1
Unit activation.
Wall-mounted control panel:
press
select
On
press
Unit status
Off
On
The green LED light starts glowing.
The current operation mode is activated and the control panel display shows the main window.
Set temperature
Customer set temperature
Current operation
mode
Clock
Fan speed
Heater
power
room
set
Vent.
Heat.
Unit operation modes:
Manual mode (parameters are set by the user, the day and the week timers are off) −
P
.
Day timer −
С
.
Week timer −
H
.
2
Unit deactivation
Wall-mounted control panel:
press
select
Off
press
Unit status
On
Off
The unit changes into the heater shutdown
mode confirmed by the blinking green LED
light indicator and turns off in 2 minutes.
The parameters are selected and edited via
the user menu, see below.
Unit shutdown procedure:
Shutdown of electric heating elements.
Changeover to low speed and running with low speed for 2 minutes.
Activation of «Heater blowing» mode. The green LED light is blinking. This mode is used for cooling of the electric
heating elements and preventing tripping of the thermal switches.
Unit shutdown in 2 minutes.
Heater blowing
(2 minutes)
3
Interface language selection
Available interface language options: English, German, Ukrainian, Danish, Polish.
Change of interface language as follows:
press
select required
language
press
English
Deutsch
Русский
Українська
Deutsch
Danish
Українська
Polski
Warning! If no button is pressed for 10 s or in case of pressing Escape button the system changes into main window without any changes.
Table 6. Unit parameter control and adjustment
KOMFORT_LE_v2(2)_EN.indd 12
10.08.2015 12:00:48
