background image

The fan casing is made of an aluminium frame, fastened with aluminium angles, and removable heat and sound insulating two-layer 
aluzinc panels.
Due to a casing made of aluzinc with increased corrosion-resistant properties and a heat-insulating material, the fan can be used for 
outdoor installation.
The Iso-V fan is equipped with a four- or six-pole AC motor with an external rotor and an impeller with backward curved blades.
The Iso-V EC fan is equipped with a maintenance-free EC motor with an external rotor and an impeller with backward curved blades.
The fan has a special design that allows changing the position of the side panels for air supply in all directions, both linearly and at an 
angle of 90°. 
The Iso-V fans may be used for construction of various configurations of ventilation systems. 

Motor

Frame

Panel

Terminal box

Linear connection of air ducts

Air duct connection at 90°

The spigots, which also function as vibration damping inserts, can be of square or round cross-section. 
The round spigots are rubber sealed.
The connecting spigots are not included in the delivery set and can be ordered separately.

DESIGN AND FUNCTIONING

www.blaubergventilatoren.de

iso-V

9

Содержание Iso-V





















Отзывы: