background image

STORAGE AND TRANSPORTATION REGULATIONS

•  Store the unit in the manufacturer’s original packaging box in a dry closed ventilated premise with temperature range 

from +5 ˚C  to +40 ˚C  and relative humidity up to 70 %.

•  Storage environment must not contain aggressive vapors and chemical mixtures provoking corrosion, insulation, and sealing 

deformation.

•  Use suitable hoist machinery for handling and storage operations to prevent possible damage to the unit.
•  Follow the handling requirements applicable for the particular type of cargo.
•  The unit can be carried in the original packaging by any mode of transport provided proper protection against precipitation and 

mechanical damage. The unit must be transported only in the working position.

•  Avoid sharp blows, scratches, or rough handling during loading and unloading.
•  Prior to the initial power-up after transportation at low temperatures, allow the unit to warm up at operating temperature for at 

least 3-4 hours.

TROUBLESHOOTING

PROBLEM

POSSIBLE REASONS

TROUBLESHOOTING

The fan does not start.

No power supply.

Make sure that the power supply is connected correctly, otherwise 
resolve the connection error.

Low air flow.

The ventilation system is 
soiled or damaged.

Make sure the air ducts are clean and intact.  Clean them if necessary.

Noise, vibration.

The impeller is soiled.

Clean the impeller.

The screw connection is 
loose.

Tighten the fastening screws.

www.blaubergventilatoren.de

iso-V

17

Содержание Iso-V





















Отзывы: