manualshive.com logo in svg

Blastrac BMS-270LPII, Руководство по эксплуатации

Поделиться
Скачать
Blastrac BMS-270LPII Скачать руководство пользователя страница 39

 

Revision B 

Revised 5/20/2003 12:33 PM 

37

 

Operating Instructions                                                               BMS-270LPII 

Maintenance

 

 
 

7.5 Changing 

Hydraulic Oil Filters Cont’d 

 

7.5.2 Changing In-tank Suction Strainer and Suction Filters 

 

 

1.

 

It is recommended that the equipment be placed in its “Maintenance Mode” 
condition as outlined in Section 2.5. 

2.

 

Let the multiscraper cool down.   

 
 
 
 

3.

 

Disconnect any hydraulic system components/hoses that may obstruct access to 
the hydraulic tank.  Protect disconnected hoses from dirt and debris. 

4.

 

Clean hydraulic tank access cover thoroughly with a clean, lint-free cloth.  Ensure 
that the tank is free of debris that may enter tank and contaminate the hydraulic 
oil and damage the hydraulic system. 

5.

 

Remove bolts on perimeter of the access cover and remove the cover.   

6.

 

Replace filters. 

7.

 

Re-attach hydraulic tank access cover, ensuring that all bolts are secure.  Replace 
gasket material on access cover if necessary. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

DANGER:  Be sure the oil has cooled down before changing the filters.  The oil 
temperature can be in excess of 200 deg F and will cause severe burns if touched.

Содержание BMS-270LPII




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды