Revision B
Revised 5/20/2003 12:33 PM
30
Operating Instructions BMS-270LPII
Operation
6.3 Operational
and
Maintenance Procedures
Follow all federal, state, local and plant safety guidelines when inspecting, repairing or
operating this equipment. These guidelines should be followed in addition to the
instructions in this manual. Before any maintenance or repair can be accomplished, the
multiscraper must be put into its “Maintenance Mode” condition as described in Section
2.5.
6.4
Start-up After Maintenance or Repair
See manual, Initial Operation, Chapter 5.2.
6.5 Procedures
Before
and
After Long Storage Time
Storage time in excess of three months.
Before Storage
•
Shut down (see Shut Down Procedure, Section 6.2).
•
Protect motors from dirt, dust, moisture, heat and shock.
•
Clean the multiscraper and cover with protective tarp.
•
Unused blank steel (inserts and scraper blades) should be covered with oil or
other rust protection.
After Storage
See Section 5.2, Initial Operation.
WARING: The blades are sharp and/or hot and could cause severe cuts and/or
burns. To reduce the risk of severe cuts and/or burns blades should be handled
with leather gloves.
Содержание BMS-270LPII
Страница 1: ...Model BMS 270LPII ...
Страница 2: ...Operating Instructions Model BMS 270LPII ...
