manualshive.com logo in svg

Blastrac BMS-270LPII, Руководство по эксплуатации

Поделиться
Скачать
Blastrac BMS-270LPII Скачать руководство пользователя страница 38

 

Revision B 

Revised 5/20/2003 12:33 PM 

36

 

Operating Instructions                                                               BMS-270LPII 

Maintenance

 

 
 

7.5 

Changing the Hydraulic Oil Filters 

 

7.5.1 Changing the Return Line Oil Filter Element 

 
IT IS NOT POSSIBLE TO CLEAN THROWAWAY FILTER ELEMENTS.  
THESE ELEMENTS INCLUDE THE RETURN FILTER, AND THE IN-TANK 
CHARGE PUMP FILTERS.  PAPER ELEMENTS CANNOT BE CLEANED. 

 

1.

 

It is recommended that the equipment be placed in its “Maintenance Mode” 
condition as outlined in Section 2.5. 

2.

 

Let the multiscraper cool down.   

 
 
 
 

3.

 

Clean the filter housing cover thoroughly with a clean, lint-free cloth.  Ensure that 
the area is clear of debris that may enter tank and contaminate the hydraulic oil 
and damage the hydraulic system. Twist slightly and remove cover from housing. 

 

Be aware that filter housing cover is under spring pressure.  Hold down while 
twisting and removing the housing cover. 

 

4.

 

Remove the filter element. 

5.

 

Check the O-ring and the support ring inside the filter housing for damage.  
Replace these elements, if necessary. 

6.

 

Drop in new filter cartridge. 

7.

 

Reinstall housing cover, twist to lock.

 

 
 

 
 
 
 
 
 
 
 
 
 

DANGER:  Be sure the oil has cooled down before changing the filters.  The oil 
temperature can be in excess of 200 deg F and will cause severe burns if touched.

Содержание BMS-270LPII




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды