4
1. Introduction
Before use, operators must be provided with information, instruction and training for the use of the machine
and the substances for which it is to be used, including the safe method of removal and disposal of the
material collected. All persons who are working with or maintaining this machine must read the manual
carefully and understand it fully. In case you sell the unit, hand it on to the next owner.
Keep this manual always with the machine, to enable it to be referred to at any time.
Any other work not covered by this operating manual must not be carried out.
This machine is designed for industrial use by professionals.
Only authorized and trained personnel may
operate this machine.
This machine is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge.
Blastrac BV
offers a course on
the use of the machine in order to make the operating and maintenance personnel familiar with all elements of
the machine. Always use common sense when working with machines.
2. Machine description
The BMG-435 is an electrical driven planetary grinding machine. This is a three headed machine for levelling,
grinding and polishing of floors. The 3 planetary rotating discs are
Ø
155 mm. It can be used for dry and wet
applications.
The BMG-435 can be used on almost any floor to plane, to make ready for coatings, or to remove coatings or
glue residues or to expose aggregate. The machine may not be used without an adequate dust extraction
system. A specially designed Blastrac dust collection system ensures dust-free operation of the machine and
clean air at the workspace. This machine may not be used on wood.
1
Steer
6
Motor
11
Floating shroud
2
Switch
7
Fill up block
12
Brush for floating shroud
3
Swing arm for hose
8
Drive mechanism
13
Diamond plate holders
4
Steer arm
9
Hinge plate
14
Housing
5
Water hose connection
10 Protection cover
15
Wheel frame
