Blastrac BMG-435WD, Руководство по эксплуатации

Страница: 19 / 20

19
8. Technical data
Design and specifications are subject to change without notice by Blastrac BV
IMPORTANT NOTE:
The indicated values are measured on new machines. Sound and vibration levels will vary in different
circumstances. Area influences like open outside or closed inside space, ambient temperature, the surface to
be treated, etc. will give different values at all time.
The declared vibration and sound emission levels represent the main applications of the machine. However if
the machine is used with different accessories or poor maintenance, the vibration and sound emissions may
differ. The values may be used for a preliminary assessment of exposure.
For a precise estimate of the vibration and sound load, the times should also be considered during which the
machine is switched off or even running, but not actually in use. This may significantly decrease the exposure
level over the total working period. Ear protection is recommended with the use of this equipment.
BMG-435WD
1x230V
BMG-435WD
3x230V
BMG-435WD
3x400V
BMG-435WD
1x110V
Power consumption 2,2 kW 3,0 kW 3,0 kW 2,2 kW
Electrical
connection
230V / 50 Hz
3x230V
50/60Hz
400V / 50Hz 110V / 50 Hz
Amperage 12,9A 11,8A 6,0A 28,0A
Diameter diamond
disc
Ø 155 mm Ø 155 mm Ø 155 mm Ø 155 mm
Working width 435 mm 435 mm 435 mm 435 mm
Rotation speed 720 min
-1
720/860min
-1
720 min
-1
720 min
-1
Length 1310 mm 1310 mm 1310 mm 1310 mm
Width 460 mm 460 mm 460 mm 460 mm
Height 930 mm 930 mm 930 mm 930 mm
Weight 115 kg 115 kg 115 kg 115 kg
Noise level
Uncertainty
76dB(A)
2,5dB
76dB(A)
2,5dB
76dB(A)
2,5dB
76dB(A)
2,5dB
Hand-arm vibration
emission level Less than
2,5m/s
2
Less than
2,5m/s
2
Less than
2,5m/s
2
Less than
2,5m/s
2
Dust hose
connection
51 mm Ø 51 mm Ø 51 mm Ø 51 mm Ø
Suitable filter unit
Contact Blastrac BV
We will assist you with a good advice