Blastrac BDC317P Скачать руководство пользователя страница 9

Страница: 9 / 48

MODEL BDC317P DUST COLLECTOR

OPERATING MANUAL

APRIL 2008

SECTION 2

SAFETY INSTRUCTIONS

Dust Collectors

Use personnel protection equipment if necessary or required by

regulations! Take notice of all safety and hazard notices on the

dust collector!

Changes, add-ons or conversions to the dust collector which might

impair safety must not be undertaken without the manufacturer’s

permission!

From time to time the working practices of the staff are to be checked regarding

awareness of safety and hazards.

Operators must tie back long hair, and not wear loose clothing or jewelry

including rings. There is a risk of injury by items getting caught, or being drawn

into moving machinery.

All safety and hazard notices at or on the dust collector must be kept complete

and legible!

If safety-critical changes occur to the dust collector or its working method, the

dust collector must be shut down immediately! The cause of the fault must be

identified and remedied immediately!

This applies in particular to the fitting and adjustment of safety devices as well as

to welding on load-bearing parts.

Spare parts must comply with the technical requirements specified by the

manufacturer. This is always guaranteed if original spare parts are used.

Intervals for recurring checks and inspections specified in these Operating

Manual must be complied with!

To perform maintenance work correctly, it is imperative to be equipped with the

proper tools for the task.

The location and the operation of fire extinguishers must be made known on

each work site!

Take note of the facilities for reporting and fighting fires!

Содержание BDC317P

















































Результаты поиска

Содержание BDC317P

Отзывы:

Похожие инструкции для BDC317P

Бренды по названию

Популярные бренды

Blastrac BDC317P, Руководство пользователя

Результаты поиска

Содержание BDC317P

Отзывы:

Похожие инструкции для BDC317P

Бренды по названию

Популярные бренды